Low GDD Ultrafast Mirrors
|Diameter tolerance||+0/-0.1 mm|
|Thickness tolerance||±0.1 mm|
|Surface quality||20-10 S-D|
|Surface flatness||<λ/8 @ 632.8 nm|
|Reflection GDD for s polarization||-10 fs² to 10 fs²|
|Reflection GDD for p polarization||-20 fs² to 20 fs²|
|Protective chamfers||<0.25 mm x 45°|
|Coating adhesion and durability||Per MIL-C-675A|
|Laser damage threshold reports||www.altechna.com/lidt|
|Other dimensions and wavelengths are available in small and mass production quantities|
|GDD values ranges from -10 fs2 to 10 fs2 at design bandwidth|
Altechna offers a wide range of high performance optical coatings on standard, custom or customer supplied optics.
Our coatings cover wavelength range from deep UV (193 nm) to far IR (25 µm) with biggest part of coatings done in wavelength ranges of most conventionally accessible laser and illumination sources from 266 nm to 2 µm.
We offer a set of standard and custom coatings per individual request:
- Anti-reflection coatings
- High reflection coatings
- Beam splitter coatings
- Partially reflective coatings
- Polarizer coatings
- Filter coatings
- Ultrafast GDD compensated coatings
- Gires-Tournois interferometer mirrors (GTI)
- Variable reflectivity mirrors
- Metallic coatings
At Altechna we aim to provide high damage threshold, high quality coatings for constantly growing photonics market with highest standards.
Each coating is special and over the years in the photonics field we have learned that flexibility is the key to meet high demands of our customers therefore our coatings are done using different technologies which are chosen for separate coatings individually. Here is our list of coating technologies available at Altechna:
- Electron beam evaporation
- Ion assisted deposition
- Ion beam sputtering
Each technology is different and is used according to requirements of spectral sensitivity, damage threshold, hardness, surface quality etc.
|Electron beam evaporation||Ion assisted deposition||Ion beam sputtering|
|Deposition Rate||>10 Å/sec||~10 Å/sec||~3 Å/sec|
|Coating area per run||3000 cm2||3000 cm2||500 cm2|
|Temperature Range During Coating||200 - 300°C||20 - 100°C||20 - 150°C|
|Number of Layers||1-50||~50||200|
|Density / Porosity||Porous||Dense||Near bulk|
|Adhesion / Durability||Low||Good||Excellent|
|Humidity Sensitivity||Yes||Yes, small||No|
|Aging Effects||Yes||Yes, small||No|
|Intrinsic Stress||< 100MPa||~ 100MPa||Few 100MPa|
Polymer film First Contact™ is a unique product designed for laser optics protection, preservation and cleaning. For all sorts of optical items it serves as a protection layer from damages during shipping, long term storage, environment changes, etc. and removes all dust and other contamination after the film is removed from the optical surface. It is absolutely safe for almost all types of optics and optical coatings.*
- Protects against scratching, abrasion, dirt, and water damage. Also protects against corrosion caused by water vapor, oxygen, and sulfur.
- Cleans the surface, removes particulates and organic contaminants.
- Leaves no residue.
- Leaves no hazardous waste.
- Safe to store for up to 4 years (period may be extended depending on storing conditions).
- Comes off in one piece.
- Does not lift metal from metal films.
- Safe with temperatures up to 200° C.
- Environmentally friendly
* Protective polymer cannot be used with optical components sensitive to acetate.
Price – 3 EUR per item (price includes coating service and polymer)
If you want to order protective coating please select "Optics Protection" in the catalog list.
Holding the sticker slowly peel the film starting from the edge. If necessary place the optic in its corresponding mount prior to removing the film.
Order your item
You can customise this product to your needs. If you do not find suitable specifications for your application please contact us for custom solution.Fill form
Order from stock
Choose from 149 Low GDD Ultrafast Mirrors