Nonlinear Crystals


Local representative

Laserand

Laserand
Tel: (514) 452-4693
E-mail: [email protected]
www.laserand.com

Product Catalog 2017

How did you hear about Altechna?







KTP Crystals

KTP Crystals
Show all
Transparency range 350 – 4400 nm
Dimensional tolerances +0/-0.1 mm
Length tolerance ±0.1 mm
Orientation accuracy of cut angle <30 arcmin
Surface quality 20-10 S-D after coating
Wavefront distortion <λ/8 @ 632.8 nm
Parallelism error <20 arcsec
Perpendicularity <5 arcmin
Protective chamfers <0.1 mm x 45°
Material optical damage threshold >0.5 GW/cm2 for 10 ns pulses @ 1064 nm
Price list
fill request form
Attention! You can customise this product to your needs.
It exhibits high optical quality, broad transparent range, relatively high effective SHG coefficient (about 3 times higher than that of KDP), rather high optical damage threshold, wide acceptance angle, small walk-off and type I and type II non-critical phase-matching (NCPM) in a wide wavelength range.
KTP is the most commonly used material for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at the low or medium power density.
We offer Positioning Mount 5APH59T-1 for Nonlinear Crystal Housing.
varna Efficient frequency conversion and Large non-linear optical coefficients
varna Wide transmission region from 350 nm to 4400 nm
varna Wide angular bandwidth and small walk-off angle
varna Broad temperature and spectral bandwidth
varna Low cost compare with BBO and LBO

Order your item

1
Items per page page
Aperture dimensions, mm Length, mm Application Coatings S1/S2, nm/nm Orientation Theta/Phi, deg Delivery Product ID Price Action
4 x 4 6 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-4406 Request REQ
7 x 7 9 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-7709 Request REQ
3 x 3 5 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-3305 Request REQ
3 x 3 10 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-3310 Request REQ

Customize

You can customise this product to your needs. If you do not find suitable specifications for your application please contact us for custom solution.

Fill form