10MWA168 - Motorised Variable Wheel Attenuator
|Rated Current||0.4 A|
|Holding torque||0.12 N m|
|Step angle accuracy||5 minutes|
|Required electrical power||5.6 W|
We supply the attenuators with a standard, most popular, set of filters. See the table 'Standart specificaions' tab. Also we can offer custom made otics. Or you may choose the attenuators with filters, that you can fix by yourself. You bring a filter of each wheel into the optical path easily by hand or using automation.
The two wheels are driven by single step motor. A computer can operate it via a controller. The Step Motor Controller Cards 8SMCC1/8SMCC3 and computer software 10MWA168S2 come separately.
For fastening, the attenuator has clearance slots for M6 and M4 csrews. There are also two M6 holes, and one M4 hole (opposite to one of the M6 holes). Optical axis can be set anywhere in a contiguous range, except where it is obscured by the base of the filter. The elevation of the optical axis, may vary between 34-97 mm. Material: black anodized aluminium.
|2 wheels contain 6 filters, 1 target plate & 1 empty space each|
|Diameter NDF 20 mm|
|Clear aperture 18mm|
|Non parallel filters (inclined by 4)|
|Maximum thickness of filters - 2 mm|
|Custom design available|
Order your item
You can customise this product to your needs. If you do not find suitable specifications for your application please contact us for custom solution.Fill form
Laser optics direct from stock. All products are inspected at metrology laboratory, certified and delivered worldwide direct from European Union.