KD*P Pokels Cells Description
|
The PC-series of KD*P longitudinal Pockels cells have been designed to give highest possible switching times
The PC-series of KD*P longitudinal Pockels cells have been designed to give highest possible switching times and are normally used for Q-switching times and are normally used for Q-switching lasers.
The cells are manufactured from crystals that have been specially selected for their low optical loss and and strain free properties. They can be used in optical range 400-1100 nm and normally have AR coating at customer specified wavelength.
The crystals are set in temperature-stabilized mounts, which accurately maintain the maximum contrast ratio without adjustment of bias voltage and prevent surface degradation by humidity.
KD*P crystals with wedge and Brewster angle surfaces are available on request.
KD*P Pokells Cell
| Model |
Aperture, mm |
Half-wave voltage (1064 nm, 20deg), kV |
Maximum voltage, kV |
Contrast ratio (1064 nm) |
Crystal length, mm |
Damage threshold, MW/cm2 with AR coating |
Damage threshold, MW/cm2 without coating |
Single pass insertion loss, % |
| PC-8 |
8x8 |
6,7-7,5 |
8.0 |
1000:1 |
16 |
400 |
500 |
<4 |
| PC-10 |
10x10 |
6,7-7,5 |
8.0 |
1000:1 |
20 |
400 |
500 |
<4 |
| PC-15 |
15x15 |
6,7-7,5 |
10.0 |
1000:1 |
30 |
400 |
500 |
<5 |
| |
To request information about the product please fill in the form:
|
Ask Altechna a question
How to buy
